Multitech MultiModem MT5600ZDX User Manual page 42

4 AT Commands, S-Registers, and Result Codes
Command: :E n MNP10 Compromise Equalizer Enable
Values: n = 0 or 1
Default: n/a
Description: This command is included only for compatibility and performs
no function.
:E0–:E1 n/a
Command: $SB n Serial Port Baud Rate
Values: n = speed in bits per second
Default: 57600
Description: $SB300
$SB1200
$SB2400
$SB4800
$SB9600
$SB19200
$SB38400
$SB57600
$SB115200 Set serial port to 115200 bps.
$SB230400 Set serial port to 230400 bps.
Note: See also the L5 command.
Set serial port to 300 bps.
Set serial port to 1200 bps.
Set serial port to 2400 bps.
Set serial port to 4800 bps.
Set serial port to 9600 bps.
Set serial port to 19200 bps.
Set serial port to 38400 bps.
Set serial port to 57600 bps.
38