Muratec MFX-2050 Field Engineering Manual page 101

Machine Parameter 140
Initial
Switch
Setting
7 0 Printer registration
adjustment.
6 0
5 0
Adjusts the left margin at the
4 0
1st cassette for printing.
3 0
2 0
The plus setting increases
1 0
the left margin and the minus
0 0
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
Machine Parameter 141
Initial
Switch
Setting
7 0 Printer registration
adjustment.
6 0
5 0
Adjusts the left margin at the
4 0
2nd cassette for printing.
3 0
2 0
The plus setting increases
1 0
the left margin and the minus
0 0
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
Machine Parameter 142 ~ 146 — Factory use only
Adjust
See table on page 3-21.
Note: The surrounding margin (right / left / top /
bottom) is set in Unique Switch 52. If you want to
adjust only left margin, adjust it in this switch.
Adjust
See table on page 3-21.
Note: The surrounding margin (right / left / top /
bottom) is set in Unique Switch 52. If you want to
adjust only left margin, adjust it in this switch.
3-17
Usage/Comments
Usage/Comments