Muratec MFX-2050 Field Engineering Manual page 42

TCP/IP Settings (only Admin.)
Setting Method
TCP/IP Setting
IP Address
Subnet Mask
Gateway Address
DNS Server Address
・DNS Suffix
DHCP Setting (ON/OFF)
 Network Environment Initialize
MAC Address Display
PING
SMB Setting
NetBIOS
Workgroup
WINS
HTTP Port No. Change
Client Port No. Change
InfoMonitor Port No. Change
Scan to Print Monitor
Network Setting Code (only Admin.)
Read/Write Code
Read Only Code
Backdoor Password
SMPT/POP Settings (only Admin.)
Setting Method
Machine E-mail Address
Machine Name
Reply-to Address
SMTP Server Setting
・Mail Server Address/Domain Name
・ Substitute Tx Mail Server
・SMTP Port Number
・ Main Retrieve before Tx
・SMTP Authentication
- SMTP Auth Account
- SMTP Auth Password
POP3 Server Setting
・ POP Server Address/Domain Name
・E-mail Account
・Password
・POP3 Port Number
・APOP Authentication
・Auto Rx Interval
SMTP Rx Setting
・Rx Domain Name
・Rx Port Number
・ E -mail Address/Domain Name/IP Address to
allow Rx
Item
Item
Item
Specifications / Comments
yes (Control panel/Browser)
yes
yes
yes (max. 2 addresses)
yes (max. 2 addresses)
yes (50 characters)
yes, renew command is supported
yes (Browser)
yes (Control panel)
yes (Control panel)
yes
yes
yes (max. 2 addresses)
yes
yes
yes
yes
Specifications / Comments
yes, 4 digits
yes, 4 digits
yes, embedded 7 digits
Specifications / Comments
Browser
yes
yes
yes
50 characters
no
1-65535
yes
yes, LOGIN / PLAIN / CRAM-MD5
yes
yes
yes
yes
yes
yes
yes
5sec. - 99 hrs 59min. 59sec, 0 (Stop)
50 characters
0-65535
50 characters x 5
1-37