Muratec MFX-2050 Field Engineering Manual page 275

Message on the display
Close XXX Cover
Close XXX cassette
Close the Scanner Unit
Communication error
Communication in progress.
Contact service for printer option
Continue to store?
[Yes] [No]
Copy protected
Copy reservation has been disabled.
Cover Open
DHCP server did not respond.
Dialing number has not been set.
Document full
Document stored
Drum should be replaced.
Enter location.
Enter the end day.
Enter the end time.
Enter the start day.
Enter the start time.
Enter the sub-address
Error
Error on Printing
Feeder In Use
Follow Instruction A
Incorrect passcode
Invalid Address Book Location!
Description / Solution
The cover indicated on the display is open or has not been closed
securely. Close it properly.
The paper cassette indicated on the LCD is open or has not been
closed securely. Close it properly.
The scanner unit is open. Close the scanner unit.
A communication error disrupted the reception or transmission. If
you were transmitting, press <Stop> to clear the error message
and then re-try the transmission. If you were receiving a fax, try to
contact the other person and have him/her re-try the transmission.
The function is not available during communication. Wait until it
ends.
An internal error has occurred.
The document has jammed while being stored into memory. To
continue storing press [Yes], to cancel the job press [No].
Copy is protected. To copy, set [Copy protect] to [OFF].
During copy protection, Macro program is disabled.
Copy reservation is disable. Wait until the present job is completed.
Close XXX Cover
The cover indicated on the LCD is open or has not been closed
securely. Close it properly.
DHCP configuration failed. Check the network connection. If the
LAN cable is not connected, connect it to the machine to connect
to the LAN. If the DHCP server is not installed on your network,
turn off the "DHCP setting" and register the IP address manually.
For more information, refer to the MFP User's Guide or PC User's
Guide.
You are selecting a non-registered address book number. Check
the address book number and try again.
You tried to store a document in a Batch Tx box, but the machine
has reached its capacity (40 documents). Delete unnecessary
documents stored or use other Batch Tx box.
You tried to erase a batch box which contains at least one
document. To erase a batch box, erase all the documents stored in
the box.
The drum cartridge has run out. Replace with a new drum
cartridge.
No destinations are entered. Enter at least one destination to
register the setting.
The end forwarding day is not entered in Fax forward setting.
The end forwarding time is not entered in Fax forward setting.
The start forwarding day is not entered in Fax forward setting.
The start forwarding time is not entered in Fax forward setting.
You tried to create an F-code box without entering a sub-address.
Sub-address is a required field.
The image transfer failed. Check the printed out "Check Massage"
to identify the error.
You cannot print a file that is larger than 10 MB. User PC print
function to print the file.
– or –
Memory has overflowed during printing. Try again later.
There is a manual delayed transmission reserved in the ADF. Wait
until the job is finished, or cancel the delayed transmission by
removing the document.
Follow the instruction that will be displayed on the screen to clean
the charge wire.
The entered passcode is wrong. Enter the correct passcode.
A non-registered address book number is selected. Either choose
another number or manually dial the number.
4-9