Sensor Input Test - Muratec MFX-2050 Field Engineering Manual

3.22 Sensor input test

This mode can confirm the sensor status. When the sensor operates, the value next to sensor name
changes 0 to 1. For example, when open the 1st paper cassette, the CAS1:OFF change to CAS1:ON.
1. Press <Setting>, <*>, <2>, <2>.
Sensor
Code
name
CAS1 OPEN1 OFF:1st cassette is close
ON:1st cassette is open
JAM1 JAMC1 OFF: 1st side cover is close
ON: 1st side cover is open
PES1 PES OFF: Detect paper in 1st cassette
ON: No paper in 1st cassette
CAS2 OPEN2 OFF:2nd cassette is close
ON:2nd cassette is open
JAM2 JAMC2 OFF: 2nd side cover is close
ON: 2nd side cover is open
PES2 PES2 OFF: Detect paper in 2nd cassette
ON: No paper in 2nd cassette
HPES TRAYS OFF: Detect paper in bypass tray
ON: No paper in bypass tray
C2U ----- OFF: No 2nd cassette
ON: 2nd cassette is attached
CVSW ----- OFF: Front cover is close
ON: Front cover is open
PSS PSS OFF: No paper
ON: Detect paper
PDS PDS OFF: No paper
ON: Detect paper jam
SWB DPS Not working
2. Press [Enter] to return to standby mode.
Note: CAS2, JAM2 and PES2 do not change, when there is no second cassette attached.
Status Code
DREX -----
DRNW -----
DVNW -----
DS1
DS2
HS
TXIL
APS
TEMP -----
BAT
THR
TS1
TS2
3-137
Name Status
OFF: No drum
ON: Detect drum
OFF: Drum used
ON: Drum new
OFF: Developing unit used
ON: Developing unit new
DS1 OFF: No document
ON: Document existing
DS2 OFF: No document
ON: Document existing
Home OFF: Mirror outer than HS
Sensor ON: Mirror inner than HS
TXIL OFF: Scanner cover is closed
ON: Scanner cover is open
----- OFF: Platen cover is open
ON: Platen cover is closed
Show the internal temperature
of machine.
----- Show the voltage of the SDRAM
backup battery.
----- Show the temperature of Heater
roller.
----- Show the remaining toner level.
----- Show the remaining toner level.