Display Panel - HP Compaq Elite 8300 All-in-One Maintenance & Service Manual

13. Note the routing path for each antenna for replacement.
Figure 7-78
To install the antenna, reverse the removal procedures.

Display panel

Model 6300 offers three different display panels – LG, AUO, and CMI.
Model 8300 offers three different display panels – LG, Samsung, and CMI.
Display panels require a backlight cable specific to the manufacturer. Make sure you use the
backlight cable packaged with the display panel.
The display panel is secured to the base pan with four Torx screws.
To remove the display panel:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the optical drive (see
4. Remove the stand (see
5. Remove the lower panel (see
6. Remove the metal plate (see
Antenna routing paths
Access panel on page
Replacing the optical disc drive on page
Stand on page
Lower panel on page
Metal plate on page
Preparing to disassemble the computer on page
36).
38).
40).
41).
32).
47).
Display panel 99