Speakers - HP Compaq Elite 8300 All-in-One Maintenance & Service Manual

Speakers

On products that ship with speakers, the speakers are located at the bottom of the computer. Two
separate speakers are each secured by two Torx screws. To remove the right speaker you have to
remove the power supply plug.
Speakers are optional.
Figure 7-56
To remove the speakers:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the stand (see
4. Remove the lower panel (see
5. Remove Torx screw that secures the power connector to the computer, and lift the connector
from its position on top of the left speaker (1).
6. Remove two Torx screws (2) that secure each speaker to the computer.
7. Disconnect the speaker cables from the system board connector labeled SPKR(3).
Figure 7-57
8. Remove the speakers from the computer.
To install the speakers, reverse the removal procedures.
76 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
Speaker location
Stand on page
Lower panel on page
Removing the speakers
Preparing to disassemble the computer on page
Access panel on page
38).
40).
36).
32).