Computer Setup-Security - HP Compaq Elite 8300 All-in-One Maintenance & Service Manual

Computer Setup—Security
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-3 Computer Setup—Security
Option
Setup Password
Power-On Password
Device Security
USB Security
Description
Allows you to set and enable a setup (administrator) password.
NOTE: If the setup password is set, it is required to change Computer Setup options, flash the
ROM, and make changes to certain plug and play settings under Windows.
Allows you to set and enable a power-on password. The power-on password prompt appears
after a power cycle or reboot. If the user does not enter the correct power-on password, the unit
will not boot.
Allows you to set Device Available/Device Hidden for:
●
Embedded security device (some models)
●
System audio
●
Network controller
●
SATA0
●
SATA1
●
SATA2
●
SATA3
Allows you to enable or disable groups of USB ports or individual USB ports. Default is device
available.
●
Front USB Ports
◦
USB Port 1
◦
USB Port 2
●
Rear USB Ports
◦
USB Port 1
◦
USB Port 2
◦
USB Port 3
◦
USB Port 4
●
Accessory USB Ports
◦
USB Port 1
◦
USB Port 2
◦
USB Port 3
◦
USB Port 4
◦
USB Port 5
◦
USB Port 6
Computer Setup (F10) utilities 15