Solving Media Card Reader Problems - HP Compaq Elite 8300 All-in-One Maintenance & Service Manual

All-in-one business pc
Hide thumbs Also See for Compaq Elite 8300 All-in-One:
Table of Contents

Advertisement

The removable hard drive enclosure is beeping and the green LED is flashing.
Cause
Fan failure alarm on the removable hard drive enclosure has
been activated.

Solving media card reader problems

Table 8-4
Solving media card reader problems
A write-protected or locked error occurs when attempting to write to the media card.
Cause
Media card is locked. Locking the media card is a safety
feature that prevents writing to and deleting from an SD/
Memory Stick/PRO card.
Can not write to the media card.
Cause
The media card is a read-only memory (ROM) card.
Media card is locked. Locking the media card is a safety
feature that prevents writing to and deleting from an SD/
Memory Stick/PRO card.
Unable to access data on the media card after inserting it into a slot.
Cause
The media card is not inserted properly, is inserted in the
wrong slot, or is not supported.
Do not know how to remove a media card correctly.
Cause
The computer's software is used to safely eject the card.
Solution
Shut down the computer and contact HP for a replacement
enclosure.
Solution
If using an SD card, make sure that the lock tab located on
the right of the SD card is not in the locked position. If using
a Memory Stick/PRO card, make sure that the lock tab
located on the bottom of the Memory Stick/PRO card is not
in the locked position.
Solution
Check the manufacturer's documentation included with your
card to see if it writable. Refer to the previous section for a
list of compatible cards.
If using an SD card, make sure that the lock tab located on
the right of the SD card is not in the locked position. If using
a Memory Stick/PRO card, make sure that the lock tab
located on the bottom of the Memory Stick/PRO card is not
in the locked position.
Solution
Ensure that the card is inserted properly with the gold
contact on the correct side. The green LED will light if
inserted properly.
Solution
Open Computer, right-click on the corresponding drive icon,
and select Eject. Then pull the card out of the slot.
NOTE:
Never remove the card when the green LED is
flashing
Solving media card reader problems 117

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq pro 6300 all-in-oneCompaq elite 8300 touch

Table of Contents