Display Panel - HP 205 G1 Maintenance & Service Manual

Serial Number
SKU Number
Asset Tag
Feature Byte
Build ID

Display panel

Description
Display panel, 18.5-inch, anti-glare , LED N-ZBD, 200 nits
Display panels require a backlight cable specific to the manufacturer. Make sure you use the backlight cable
packaged with the display panel.
The display panel is secured to the computer with four Torx screws.
To remove the display panel:
1. Prepare the computer for disassembly (see
2. Remove the rear cover (see
3. Remove the optical drive (see
4. Remove the system board cover (see
5. Remove the memory modules (see
6. Remove the WLAN module (see
7. Remove the speakers (see
8. Remove the hard drive (see
9. Remove the front bezel (see
48 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Enter the Serial Number of Unit.
Enter the SKU or Product Number including Localization Code.
Enter the 18-byte identifier assigned to the computer.
Enter the Feature Byte string. The feature byte string is case sensitive.
The label includes spaces after every four characters. You can enter or ignore these
spaces – their only purpose is to help with data entry. There is a character
limitation of 40 bytes per line. When you reach this limit, go to the next line to
continue data entry. BIOS ignores the spaces and lines.
If you make an error during data entry, the data will not validate, and the computer
asks you to correct your data input.
The Build ID of the unit.
Rear cover on page
Replacing the optical disc drive on page
System board cover on page
Memory on page
WLAN module on page
Speakers on page
Replacing drives on page
Front bezel on page
Preparing to disassemble the computer on page
20).
39).
41).
43).
34).
23).
28).
Support
Support
Support
Flexbuild
Flexbuild
Spare part number
752345-001
19).
26).