Metal Plate - HP Compaq Elite 8300 All-in-One Maintenance & Service Manual

Metal plate

The metal plate is located under the stand.
Figure 7-14
To remove the metal plate:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the stand (see
4. Remove the lower panel (see
5. Remove the two Torx screws (1) securing the metal plate to the chassis.
Metal plate location
Stand on page
Lower panel on page
Preparing to disassemble the computer on page
Access panel on page
38).
40).
36).
32).
Metal plate 41