Category: Modulation Modulation-Type Effects - Korg D32XD Owner's Manual

34: Mono ER
Type
Selects the decay curve for the early reflection
ER Time
Predly (Pre Delay)
Sets the time taken from the original sound to the first early
Dry:Wet
Sets the balance between the effect and dry sounds
LoDamp (Low Damp)
HiDamp (High Damp)
Sets the damping amount in the high range
35: Mono Delay
Time (Delay Time)
Feedback (Feedback)
In Level (Input Level)
Dry:Wet
Sets the balance between the effect and dry sounds
LoDamp (Low Damp)
HiDamp (High Damp)
Sets the damping amount in the high range
Analog (Analog Satulation)
36: Mn.Multitap Delay
(Mono Multitap Delay)
Tap1Time
Tap2Time
Tap3Time
WetLevel
Tap1Level
Tap2Level
Tap3Level
DryLevel
LoDamp (Low Damp)
HiDamp (High Damp)
Sets the damping amount in the high range
162
Sharp, Loose, Modulated, Reverse
10...800msec
Sets the time length of early reflection
Dry, 1:99...99:1, Wet
THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
53Hz...20.0kHz, THRU
0...2.730sec (1.360sec)
Sets the delay time
–100...+100%
Sets the feedback amount
Sets the input level to the effect
Dry, 1:99...99:1, Wet
THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
53Hz...20.0kHz, THRU
Sets the amount of analog distortion
0...2.730sec (1.360sec)
Sets the delay time of Tap1
0...2.730sec (1.360sec)
Sets the delay time of Tap2
0...2.730sec (1.360sec)
Sets the delay time of Tap3
Sets the level of the effect sound
Sets the output level of Tap1
Sets the output level of Tap2
Sets the output level of Tap3
Sets the level of the direct sound
THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
53Hz...20.0kHz, THRU
Category: Modulation
Modulation-type effects
37: Mono Chorus
0...200msec
*Speed (LFO Speed)
reflection
*Depth
PreDly (Pre Delay)
Dry:Wet
Waveform (LFO Waveform)
LoDamp (Low Damp)
HiDamp (High Damp)
Waveform (LFO Waveform)
0...100%
Analog (Analog Satulation)
38: Mono Flanger
*Speed (LFO Speed)
0...100% *Depth
Feedback
Dry:Wet
Waveform (LFO Waveform)
LFO Shape
Determines how much the LFO waveform is changed
Fb HiCut (Feedback High Cut)
Delay
0...100%
LoDamp (Low Damp)
0...100%
HiDamp (High Damp)
0...100%
0...100%
39: Mono Phaser
0...100%
*Speed (LFO Speed)
Depth
Resonance
Dry:Wet
Manual
LFO Shape
Determines how much the LFO waveform is changed
Sets the depth of LFO modulation
Sets the balance between the effect and dry sounds
Selects LFO Waveform
THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
53Hz...20.0kHz, THRU
Sets the damping amount in the high range
Selects LFO Waveform
Sets the amount of analog distortion
Sets the depth of LFO modulation
Sets the feedback amount
Sets the balance between the effect and dry sounds
Selects LFO Waveform
53Hz...20.0kHz, THRU
Sets the damping amount in the high range
Sets the left/right delay time
THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
53Hz...20.0kHz, THRU
Sets the damping amount in the high range
Sets the depth of LFO modulation
Sets the resonance amount
Sets the balance between the effect and dry sounds
Sets the frequency to which the effect is applied
0.02...20.00Hz
Sets the LFO speed
0...100
0.0...50.0msec
Sets the delay time
Dry, 1:99...99:1, Wet
Triangle, Sine
Triangle, Sine
0...100%
0.02...20.00Hz
Sets the LFO speed
0...100
–100...+100%
Dry, 1:99...99:1, Wet
Triangle, Sine
–100...+100%
0...50.0ms
0.02...20.00Hz
Sets the LFO speed
0...100
–100...+100%
Dry, 1:99...99:1, Wet
0...100
–100...+100