Store; Scene; Mark; Scrub - Korg D32XD Owner's Manual

12. STORE

This stores the current location so it can be saved as a loca-
tion, mark or scene.
When you press the STORE key, the location at that moment
is preserved, and you can assign that location to a locate,
scene, or mark point by pressing the appropriate key. If you
press the STORE key once again instead of pressing a key to
specify the assignment, the stored location will be discarded.
For details on registering and using locations, refer to Locate
( p.38), Scene ( p.52), or Mark ( p.39).

13. SCENE

Refer to "3c. FADER/PAN/AUTOMATION" ( p.105,
[*108]), Edit Scene.

14. MARK

You can register marks at a variety of locations, and then in-
stantly change the current location of the song to the location
registered to a mark. You can also assign a name to each
mark, and use them to indicate sections within a song.
( p.39)
If you add the Album CD Track Marks to a mark, the mark
will be recognized as a track division for a CD you create.
You can also use a PS-1 foot switch (sold separately) instead of the
MARK key. ( p.126)
You can register up to one hundred marks in each song.
Mark 001 is automatically created at the counter 0 location
with a name of "Song Top Mark."
1
2
1. Current Mark
This is the mark at or immediately before the current
location. The mark name, location, and the Album CD
Track Marks are displayed beside the mark number.
2. Mark list
Here you can select the mark number that you want to
recall, edit, rename, or delete. The mark name, location,
and the Album CD Track Marks are displayed beside the
mark number. Mark numbers are reassigned automati-
cally in order of their location.
3. Recall
When you press this button, the mark selected in the
mark list will be recalled, and the current song location
will change to that location.
148
4. EditLoc
When you press this button, the Edit Mark Location dia-
log box will appear. Edit the location of the mark selected
in the mark list, and press the Yes button to apply the
change. To discard the change, press the No button.
You cannot edit the location mark 001.
5. Rename
This lets you rename the mark selected in the mark list.
Press the button to display the Rename dialog box, and
edit the name of the mark. You can input a name of up to
sixteen characters. ( p.97)
6. Delete
Press this button to open the Delete dialog box, and
delete the mark. If you turn the Select All button on
(highlighted), all marks will be selected for deletion.
To delete the marks, press the Yes button. If you decide
not to delete, press the No button.
You cannot delete mark 001.
Deletion of a mark cannot be Undone.
7. Use As CD Tr
When you want to write a continuous live recording or a
long song to a CD and create track indexes to mark cer-
tain sections or individual movements, you can use this
setting to assign the selected mark as a track divider on
the CD.
When you select a mark in the mark list and press the
Use As CD Tr button, a CD Track Mark icon "
be displayed for that mark, and it will be assigned as a
track divider. You can cancel this assignment by pressing
the Use As CD Tr button once again.
Album CD Track Marks are used only when you write an Al-
bum CD Project.
If you write using Track At Once, the Album CD Track Marks
are ignored, and the song will be written as one track (song).
This lets you "scrub" the audio data in order to register or
edit locate points or mark locations more precisely.
Press the SCRUB key to display the "Scrub" page. To exe-
3
cute the Scrub function, press any other page mode key.
4
The Scrub function lets you play back the track data by turn-
5
ing the value dial, so that you can find a desired location in
6
the song while listening to the sound.
7
This is analogous to manually turning a vinyl record on a
turntable to find the beginning of a song while listening to
the sound.
The waveform window will show the waveform of the se-
lected track.
[001...100]
1
[001...100]

15. SCRUB

2 3
6
" will
4
5