Master Track; Edit Track - Korg D32XD Owner's Manual

10-2. Master Track

Here you can select a virtual track for the master track. This
track will be used as the mixdown-destination track. This is
also the track that will be used when creating an audio CD.
1. V-Level
Here you can select one of the eight virtual tracks "A"–
"H."
For virtual tracks that contain data, one corner of the icon
will be folded down.
Recording or playback operations will be performed
using the virtual track you select here.
138

10-3. Edit Track

Here you can edit tracks.
Editing operations will apply to the currently selected tracks
1–16.
The other virtual tracks (i.e., the virtual tracks that are not se-
lected) will not be affected by your editing. (However, "Cop-
yWholeTrk" and "SwapWholeTrk" are exceptions to this.)
Some of these editing operations will consume additional
space on the drive, but there are ways in which you can in-
crease the available free space ( p.142).
The locations stored in the LOC1/IN through LOC4/END
1
keys determine the region(s) that will be edited ( p.38).
LOC1/IN key: IN location
LOC2/OUT key: OUT location
LOC3/TO key: TO location
LOC4/END key: END location
After executing one of these editing operations, you can use the
Undo operation to cancel the results.
You cannot make settings that would cause the IN–OUT region
[A...H]
or the TO–END region to be longer than 12 hours (for 96 kHz,
longer than 6 hours).
1
A
2
3
1. Edit type
[CopyTrk, InsertTrk, EraseTrk, DeleteTrk, SwapTrk,
ReverseTrk, OptimizeTrk, ExpCmpTrk, CopyWholeTrk,
SwapWholeTrk, Fade Trk, NormalizeTrk]
When you press this button, the Edit Trk Type dialog box
will appear. Select the desired editing operation and
press the OK button to return to the "EditTrk" tab page.
The screen display of area "A" will change depending on
the edit type you select here.
2. ZOOM buttons
Use these buttons to expand or shrink the area displayed
in the track view window.
3. Track view window
Audio events in the track are displayed as bold lines.
The vertical line is the current location.
Locate points ( p.38) are shown in the upper part of this
area.
IN: OUT:
At the right are displayed the name of each track and the
virtual track usage status.
TO: END:
4