Connect Your Audio Sources To The Mixer Inputs; Connect Devices To The Input Jacks; Assign The Inputs To Channels - Korg D32XD Owner's Manual

The highlighted area will then move one step toward the right. Repeat this
step to edit the song name.
If you want to edit only a portion of the song name, use the
move the highlighted area, and then press a character or numeral button.
Use the buttons in the LCD screen to perform the following operations.
"0...9": Input a numeral (e.g., "0")
"A...@_...": Input an alphabetical character (e.g., "A") or symbol (e.g., @, _).
: Input a space.
: Switch the alphabet buttons between lower case and upper case.
: Insert a space, and move the subsequent characters backward.
: Delete the character at the cursor location.
: Erase the entire name.
(5) Confirm the changes.
When you have finished naming your song, press the OK button in the LCD
screen.
If you decide not to change the name, press the Cancel button.
As an alternative to the above procedure, you can use the Name Library to change the name.
Refer to "Using the name library" ( p.37).

3. Connect your audio sources to the mixer inputs

Connect devices to the INPUT jacks

This example shows how to connect a guitar, mic,
and keyboard to the mixer inputs.
(1) Set the INPUT 1 TRIM knob to the "–12" posi-
tion, and connect a guitar to the GUITAR IN
jack.
The GUITAR IN jack is shared with INPUT 1,
and the two cannot be used simultaneously
( p.12 "1 GUITAR IN jack").
(2) Set the INPUT 2 TRIM knob to the "–12" posi-
tion, and connect a mic to the INPUT 2 jack.
(3) Set the INPUT 3 and 4 TRIM knobs to the "–12"
position, and connect the output of a keyboard to INPUT jacks 3 and 4.

Assign the inputs to channels

First, specify which channel will be assigned to the gui-
tar input.
(1) Press the MIXER key, and then press the page
jump menu INPUT/OUTPUT/CH ASSIGN button
to access the "Ch Assign" tab page.
(2) In the tab page, press the CH1 SOURCE channel
icon. The icon will be enclosed by a frame.
(3) Use the
channel icon to read "1" (INPUT 1).
You can also use the value dial or the +/– keys to
change the number within the icon.
If you set the CH1 SOURCE number to "2," INPUT2 (in
the diagram at right, the mic) will be assigned to CH1.
22
buttons to set the number inside the
buttons to
Mic
OUTPUT
(2)
Guitar
(1)
Connection example
Mic
Guitar
L
INPUT2
INPUT4
INPUT1 INPUT3
INPUT5
CH1 CH2 CH3
Recorder
1Tr 2Tr 3Tr
(3)
Keyboard
Keyboard
R
CD L, R
Rhythm L, R
CH4 CH32 [*16]
32Tr
[*16Tr]
4Tr