Rename; Editing A Name; Meter; Meter Trk View - Korg D32XD Owner's Manual

Rename

Editing a name

When the Rename button is displayed in a parameter setting
tab page (such as Song, Track, Effect, Scene), you can press
the button to edit the corresponding name.
Alternatively, you can choose an appropriate name from the
name library and then edit it.
Highlight the name you want to edit, and press the Rename
button. The Rename dialog box will appear, allowing you to
edit the name. You can input a name of up to sixteen charac-
ters. Certain limitations apply to the backup or export filena-
me ( p.174).
Moves the highlighted cursor left or right in the
rename box
Inserts a space at the highlighted area
Switches between uppercase and lowercase char-
acters
Deletes the character at the highlighted area
Inserts a blank at the right of the highlighted area
Erases all characters in the rename box
OK Finalizes the name that you input
Cancel Discards the name that you input
0...9, A...Z/...@
Inputs the numeral, character, or symbol at the
highlighted location
List button
Rename box
Using the name library
When you press the list button beside the name, the name li-
brary will appear. Use the scroll bar to display the name you
want to use, and press that name to input it in the list box.
For details on the name library, refer to "Name Library List"
( p.186).
Name library

1. METER

Meter Trk View

This displays the level meters and a list of the virtual tracks
that shows whether any of them contain audio events. By
changing the "Meter Trk Type" settings you can switch the
signal shown by the level meters, or select a "Fader View"
that shows fader and pan values.
The audio event locate points (IN, OUT, TO, END) are also
displayed in this screen.
D32XD Track View
1
2
3
4
D16XD Track View
1
2
3
4
1. Display select button
Press this button to display the Meter Trk Type dialog
box, where you can select the information you want to
view. Press the OK button to apply your selections, or
press the Cancel button to discard them.
1a
1b
1c
1a. Select Level Meter Position
[CH-Input, PreFader, PostFader]
Ch-Input: Displays the input level of each mixer chan-
nel
PreFader: Displays the pre-fader level of each mixer
channel
PostFader: Displays the post-fader level of each mixer
channel
5
6
5
6
97