Rhythm; A Key Does Not Function When Pressed; Can't Edit Pan, Eq, Or Send - Korg D32XD Owner's Manual

Insert effects do not apply
Is the effect inserted at the appropriate location?
In the EFFECT, "Routing A/Routing B [*EFFRout-
ing]" tab page, select "IN" if you want to apply the in-
sert effect to the input, or "TR" if you want to apply it
to the playback. ( p.58)
Go to the EFFECT, "Routing A/Routing B [*EFFRout-
ing]" tab page and verify that the effect assign channel
(track) is correct. ( p.24)
Can't apply master effects
Is the send level from each channel set to zero or nearly
zero?
Raise the send levels in the MIXER, SEND (EFF/AUX
[*/REC]), "EFF1Send"/"EFF2Send" tab pages.
Is the return level set to zero or nearly zero?
Go to the EFFECT, "MasterEFF" tab page, and raise
the "Return Level" setting.
If you are monitoring the sound from the MONITOR
OUT L/R jacks, the monitor LR bus output may be
turned off.
In the MIXER, SOLO/MONITOR, "Monitor" tab
page, press the MasterLR button to turn it "On."
Can't apply the final effect
If you are monitoring the sound from the MONITOR
OUT L/R jacks, the master LR bus output may be turned
off.
In the MIXER, SOLO/MONITOR, "Monitor" tab
page, press the MasterLR button to turn it "On."
Can't use the expression pedal or MIDI to control an
effect
In the SYSTEM, "Control" tab page, is the effect selected
by "Control Change Assign" enabled?
Go to the EFFECT, "Routing A/Routing B
[*EFFRouting]" tab page and verify that the effect is
enabled.
Are you using the correct device to control the effect?
Control the effect using the device specified by the
"Control Change Device" setting in the SYSTEM,
"Control" tab page. ( p.126)
Is the selected effect set to effect program number "000"
(=NO EFFECT) or to an effect program number that does
not include a control function?
If you are controlling via MIDI, does the MIDI channel
number of the D32XD/D16XD match the MIDI channel
of the transmitting MIDI device? ( p.131)
Is the effect program's Ctrl setting turned on? ( p.121)
Can't apply external effect (AUX OUT)
Is the external send level setting set to zero or nearly
zero?
Go to the MIXER, SEND (EFF/AUX [*/REC]), "AUX1
Send"/"AUX2 Send" tab page, and raise the external
send level.
Is the output of your external effect connected to the
INPUT 1–INPUT 8 jacks (INPUT 1–INPUT 16 jacks if the
optional board is installed), and input to the mixer
channels?
Go to the MIXER, INPUT/OUTPUT/CH ASSIGN,
"Ch Assign" tab page and make the appropriate as-
signments.
Have sub input settings been made correctly? ( p.45,
101)
168

Rhythm

Rhythm sound is not output
In the TEMPO, "SetUp" tab page, could the Rhythm On
button be turned off?
Turn on the Rhythm On button.
Is the rhythm assign setting appropriate?
If the rhythm is assigned to a CH Input, input the
rhythm to a mixer channel.
Is the recorder stopped?
Press the PLAY key to play back. The rhythm will
sound while the recorder is recording or playing,
If you want to preview the rhythm while the recorder is
stopped, go to the TEMPO, "SetUp" tab page and turn
the Prev button on.
You may have selected a silent rhythm pattern.
The rhythm volume may be too low.
In the TEMPO, "SetUp" tab page, use "Vol." to adjust
the volume.
Can't hear the rhythm
Is the Rhythm On button off? ( p.61)
Is rhythm assign set to "Monitor" or "Master"?
Can't select rhythm
Could a 96 kHz/24-bit song be selected?
For a 96 kHz/24-bit song you can select only Metro,
Hihat, and Blank.

A key does not function when pressed

Some keys do not function while the recorder is playing
or recording.
Stop the recorder, and then perform the operation.
Some keys do not function while Scrub is on.
Turn off Scrub, and then perform the operation.
( p.40, 148)
Is a dialog box open?
Press either the Yes, No button to close the dialog box.
The 1–16/17–32 key does not work (D32XD)
In the case of a 24-bit song, only sixteen channels are
available, so this key will not function.
This key is disabled while you are touching a channel
fader knob.
If the touch sensitivity is not set correctly, the D32XD
may falsely detect that you're touching a fader even if
you are not. ( p.126)

Can't edit PAN, EQ, or SEND

When pairing is on, you cannot edit even-numbered
channels 1–32 [*16].
To edit an even-numbered channel, edit the odd-num-
bered channel to its left.
Can't make group settings (D32XD)
You cannot make group settings while you are touching
a channel fader knob.
If the touch sensitivity is not set correctly, the D32XD
may falsely detect that you're touching a fader even if
you are not. ( p.126)