3a-5. ADAT Out Assign
This screen is available only if the optional ADAT I/O board
(DIB-8) is installed. Here you can specify the output sources
for ADAT OUT.
D32XD
CH1–8/CH9–16/CH17–24/CH25–32
Output the post-fader signal of CH1–8/CH9–16/CH17–
24/CH25–32.
Track1–8/Track9–16/Track17–24/Track25–32
Output the playback of tracks 1–8/tracks 9–16/tracks 17–
24/tracks 25–32 directly, without passing the signal
through the mixer.
D16XD
CH1–8/CH9–16
Output the post-fader signal of CH1–8/CH9–16.
Track1–8/Track9–16
Output the playback of tracks 1–8/tracks 9–16 directly,
without passing the signal through the mixer.
102
3b. PAIR/GROUP [*PAIR]
3b-1. Channel Pair
Here you can specify pairing for adjacent mixer channels.
For paired channels, the following parameters will operate in
tandem and will have the same values for each channel.
Fader, Pan, CH ON, PlayEQ, RecEQ, RecSend, Eff 1/2
Send, AUX 1/2/3/4 Send [*AUX 1/2 Send], ATT, REC/
PLAY, Group (only D32XD)
Channels that are paired will be controlled by the knobs and faders
of the odd-numbered channels. Operating the knobs or fader of the
even-numbered channel will have no effect.
D32XD
D16XD
1. Select Pair Ch
Press the 1 2–31 32 [*15 16] buttons to select the
channels that are paired (the heart icon
played for paired channels).
2. PanMode
Select how panning will occur.
The pan of the two channels will operate inde-
Indiv:
pendently.
Sync:
The pan of both channels will be the same value.
Cross:
The two channels will have the opposite pan val-
ue.
Balance: The pan control will function as channel balance.
Operation when tracks 1 and 2 are paired
Indiv
Sync
1
2
1
2
Pan 1 and 2 can be
Sync If pan 1 is
set independently.
R63, pan 2 will also
be R63.
Balance
Balance Pan knob 1 operates
as the Balance knob.
Pan knob 2 has no effect.
1
2
1
2
1
2
D32XD [1 2...31 32]
D16XD [1 2...15 16]
will be dis-
[Indiv, Sync, Cross, Balance]
Cross
1
2
Cross If pan 1 is
L63, pan 2 will be
R63.