Assign And Work With A New Insert Effect For Track 3 - Korg D1600 Manuald Tour

KORG D1600 Guided Tour
Try the "Play From" function:
9. Press the PLAY key. The audio data will begin playback at the currently stopped position, and play for two seconds, before
automatically returning to the stored locate point.
Try the "Play To" function:
10. Hold the STOP key and press the PLAY key. Watch the display, as playback begins two seconds before the currently stopped
position and stops at the stored locate point.
Try the "Slow Play" function:
11. The Slow Play function lets you playback audio at half-speed, one octave below the normal pitch. This feature is good for
learning and practicing difficult phrases. To do this: While playback is stopped, press the FF key. The track will playback at
half-speed.
12. Press the STOP key, and you'll return to the stored locate point.
13. Press the "OK" button to exit SCRUB mode.
Note: When selecting SCRUB mode, all tracks are set to green (Play status).

Assign and work with a new Insert effect for Track 3:

14. Make sure playback is STOPPED, then press the INSERT EFFECT key.
15. Press the "InsAss" tab in the lower left of the display.
16. Refer to the diagram below, and press the "InsertTo" popup button in the display:
17. Press the Insert effect 2 "2" track parameter, then rotate the DIAL to select "3":
18. Press the "OK" button in the display. You've just assigned Insert effect 2 to Track 3.
20