Vertical SBX IP 320 User Manual page 70

7208D Input/Output Devices and Buttons
1 LCD Display
2 Handset
3 Headphone
4 Speaker
5 Speaker Button
6 Hold/Save Button
7 Volume
8 MSG LED
9 Flexible Buttons
10 DND Button
(Flex Btn 1)
11 Call Back Button
(Flex Btn 2)
12 Speed Button
13 Trans/PGM Button
14 MIC
7208D Keyset - Basic Features
Displays information about telephone status, dialing
directories, and test message information.
Device used to listen/speak when on a call in handset
mode.
When using a headphone, this button toggles the
headphone state.
Device used to listen to a caller in a handsfree mode
when in speaker mode.
Speaker toggles speakerphone state between speaker
mode and handset mode. The button is red when
speakerphone is active.
This button puts a call on hold or saves the PGM.
The volume button adjusts the audio level.
This button illuminated to indicate you have a message
waiting.
The 8 flexible buttons can be assigned as specific
feature buttons.
The Do Not Disturb (DND) feature disables your phone
from ringing. When DND is active, this button is red.
A station can initiate a call back request to another busy
station. Once that station becomes idle, the station that
left the call back request is signaled.
Used to access speed dialing, save number redial, and
last number redial. Also used to access flexible button
programming.
This button is used to set up a conference call or to
transfer a call.
Microphone used to speak to a caller in a handsfree
mode when in speaker mode.
SBX IP 320 User Guide
Chapter 2: 7208D Digital Phone Procedures
-
2 2