Connecting To The Computer; Ethernet Interface - Fujitsu ApeosPrint C4030 Reference Manual

2.
Tap on [Power Off Device] on the screen displayed.
Important
Power off processing is performed internally on the machine for a while after the power is switched off.

Therefore, do not perform other operation immediately after switching the power off.
2.2

Connecting to the Computer

Ethernet Interface

Note
 The following problems may be resolved by setting [Disabled] for [Device] > [Network Settings] >
[Protocol Settings] > [Ethernet Settings] > [Energy Efficient Ethernet].
- Slow network connection on the machine
- Unstable network condition of the machine which causes frequent timeout errors
- The machine fails to connect to the network after returning from a long-term Sleep mode
1.
Press the <Power/Power Saver> button and tap on [Power Off Device] on the screen displayed to
switch off the machine.
Make sure that the touch panel display is blank and the <Power/Power Saver> button is not lit.
2.
Connect a network cable to the Ethernet interface connector.
3.
Press the <Power/Power Saver> button and switch on the machine.
USB
1.
Press the <Power/Power Saver> button and tap on [Power Off Device] on the screen displayed to
switch off the machine.
Make sure that the touch panel display is blank and the <Power/Power Saver> button is not lit.
2.2 Connecting to the Computer
13