Hyundai 2000 Accent Owner's Manual page 56

B740B02A-AAT
AIR CONDITIONING OPERATION
(If Installed)
Cooling
To use the air conditioning to cool the interior:
o Turn on the fan control switch.
o Turn on the air conditioning switch by push-
ing in on the switch.
The air conditioning indicator light should
come on at the same time.
o Set the air intake control to the £2> posifon.
o Set the temperature control to "Cool". ("Cool"
provides maximum cooling. The tempera-
ture may be moderated by moving the con-
trol toward "Warm".)
o Adjust the fan control to the desired speed.
For greater cooling, tum the fan control to
one of the higher speeds or temporarily
select the dSb position on the air intake
control.
FEATURES OF YOUR HYUNDAI
B740C01A-AAT
De-Humidified Heating
For dehumidified heating:
o Tum on the fan control switch.
o Tum on the air conditioning switch. The air
conditioning indicator light should come on
at the same time.
o Set the air intake control to the fresh air
(£2>) position.
o Set the air flow control to the face ("^J)
position.
o Adjust the fan control to the desired speed.
o For more rapid action, set the fan at one of
the higher speeds.
o Adjust the temperature control to provide the
desired amount of warmth.
B740001A-AAT
Operation Tips
o If the interior of the car is hot when you first
get in, open the windows for a few minutes
to expel the hot air.
o When you are using the air conditioning
system, keep all windows closed to keep
hot air out.
o When moving slowly, as in heavy traffic,
shift to a lower gear. This increases engine
speed, which in tum increases the speed of
the air conditioning compressor.
o On steep grades, turn the air conditioner off
to avoid the possibility of the engine over-
During winter months or in periods when the
air conditioner is not used regulariy, run the
air conditioner once every month for a few
minutes. This will help circulate the lubri-
cants and keep your system in peak operat-
ing condition.
1-47