Hyundai 2000 Accent Owner's Manual page 34

Table of Contents

Advertisement

B260C01A-AAT
O/D OFF INDICATOR
(Auto T/A only)
When the overdrive switch is turned on, the
overdrive off indicator will go out. This amber
indicator will be illuminated when the overdrive
switch is tumed off (Auto T/A only).
B260D01A-AAT
TURN SIGNAL INDICATOR
LIGHTS
The blinking green arrow on the instrument
panel shows the direction indicated by the tum
signals. If the arrow comes on but does not
blink, blinks more rapidly than normal, or does
not blink at all, a malfunction in the turn signal
system is indicated. Your dealer should be
consulted for repairs.
B260P01A-AAT
ABS SERVICE REMINDER
INDICATOR (SRI) (If installed)
When the key is tumed to the "ON" position, the
ABS SRI will come on and then go off in a few
seconds. If the ABS SRI remains on, comes on
while driving, or does not come on when the
key is tumed to the "ON" position, this indicates
that there may be a problem with the ABS.
If this occurs, have your vehicle checked by
your Hyundai dealer as soon as possible. The
normal braking system will still be operational,
but without the assistance of the anti-lock brake
system.
FEATURES OF YOUR HYUNDAI
S260F01A-MT
HIGH BEAM INDICATOR
LIGHT
The high beam indicator light comes on when-
ever the headlights are switched to the high
beam or flash position.
B260E02A-GAT
SEAT BELT REMINDER LIGHT
| (If installed)
f he seat belt reminder light comes on until your
seat belt is fastened when the ignition key is
turned from the "OFF" position to "ON" or
"START".
B260G01A-AAT
OIL PRESSURE WARNING
LIGHT
CAUTION:
If the oll pressure warning light stays on
while the englne Is running, serlous engine
damage may result. The oll pressure warn-
ing light comes on whenever there Is Insuf-
ficient oll pressure. In normal operatlon, It
should come on when the Ignition switch Is
turned on, then go out when the engine Is
started. If the oll pressure warning light
stays on while the engine is running, there
is a serious malfunction.
If this happens, stop the car as soon as it is
safe to do so, turn off the engine and check
the oil level. If the oil level Is low, add engine
oil to the proper level and start the engine
agaln. If the light stays on wlth the englne
runnlng, turn the englne off immediately. In
any Instance where the oll llght stays on
when the engine Is runnlng, the engine
should be checked by a Hyundai dealer
before the car Is drlven again.
B260H02AAAT
PARKING BRAKE/BRAKE
FLUID LEVEL WARNING
LIGHT
CAUTION:
If you suspect brake trouble, have your
brakes checked by a Hyundai dealer as soon
as possible. Driving your car wlth a problem
In either the brake electrlcal system or brake
hydraullc system Is dangerous, and could
result In serlous injury or death.
Warning Light Operation
The parking brake/brake fluid level warning
light should come on when the parking brake is
applied and the ignition switch is tumed to "ON"
or "START". After the engine is started, the light
should go out when the parking brake is re-
leased.
If the parking brake is not applied, the warning
light should come on when the ignition switch is
tumed to "ON" or "START", then go out when
the engine starts. If the light comes on at any
other time, you should slow the vehicle and
bring it to a complete stop in a safe location off
1-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Accent seriesAccent

Table of Contents