Hyundai 2000 Accent Owner's Manual page 52

B670A01A-AAT
HEATING AND VENTILATION
ROTARY TYPE (If installed)
This model has four controls for the heating and
cooling system. They are:
1. Fan speed control
2. Air flow control
3. Temperature control
4. Air intake control
FEATURES OF YOUR HYUNDAI
B670B02A-AAT
FAN SPEED CONTROL
(BLOWER CONTROL)
This is used to tum the blower fan on and off
and to select the fan speed.
The blower fan speed, and therefore the vol-
ume of air delivered from the system, may be
controlled manually by setting the blower con-
trol between the "1" and "4" position.
B670C02A-AAT
AIR INTAKE CONTROL
This is used to select fresh outside air or
recirculation inside air.
Fresh
Recirculation
With the "P=y rnode selected, air enters the
vehicle from outside and is heated or cooled
according to the other functions selected.
With the "<&f mode selected, air from within
the passenger compartment is drawn through
the heating system and heated or cooled ac-
cording to the other functions selected.
NOTE:
It should be noted that prolonged operation
of the heating system in "rgs" mode will
give rise to misting of the windshield and
1-43