Hyundai 2000 Accent Owner's Manual page 12

B880C02A-GAT
Key Numbers
The vehicle key number is recorded upon a
metal tag attached to the keys when the vehicle
is first delivered to you.
The key number should be recorded and kept
in a safe place in case the need to order further
keys arises. New keys are available from any
Hyundai dealer by quoting the reievant key
number.
In the interest of security, the metal tag at-
tached to the keys which bears the key number
should be removed from the key ring after you
receive your new vehicle. In addition, key num-
bers cannot be provided by Hyundai for secu-
rity reasons.
If you need additional keys or if you should lose
your keys, your authorized Hyundai dealer can
make new keys.
FEATURES OF YOUR HYUNDAI
B880D02A-QAT
Limp home proccdures
In case the immobilizer waming indicator blinks
for five seconds when the ignition key is tumed
to "ON" position, this indicates that the immobi-
lizer system is out of order. And you cannot
start the engine without the limp home proce-
dures with ignition key.
The following procedure is how to start the
engine with the function of the limp home. (0,1,
2, 3 as a sample password).
NOTE:
You can get the limp home password when
the vehicle is first delivered to you. If you do
not have the password, consult your autho-
rized Hyundai dealer.
1. To set the password you may tum the igni-
tion key "ON" and then tum it "OFF" accord-
ing to the digit numbers, then the immobi-
lizer indicator will blink along with the opera-
tion of the ignition key. For example, tum the
ignition key once for digit number "1", and
twice for "2", and so on. However, for the
digit number "0", you must tum the ignition
key for 10 times.
2. Waitfor3~10seconds.
3. You may set the remaining number of digits
by following the same procedures 1 and 2.
4. If all of four digits have been tried success-
fully, tum the ignition key "ON" and check
that the immobilizer indicator illuminates.
From this ttme, you have to start your engine
within 30 seconds. If you start your engine
after 30 seconds, your engine will not start.
NOTE:
If the engine dies whlle drivlng after limp
home procedure, you can start your engine
within 8 seconds without limp home proce-
dure again.
5. If the immobilizer indicator blinks for five
seconds, you have to try the limp home
procedure again from the beginning.
After doing the limp home procedure, you have
to consult with your authorized Hyundai dealer
as soon as possible.
CAUTION:
o If you fail to try the limp home procedure
wlth the sequence of three tlmes, you
have to wait for about one hour to do the
limp home procedure again.
o If you can not start your engine in spite of
limp home procedure, have your vehicle
towed by an authorized Hyundai dealer.
1-3