Table of Contents
Advertisement
on its track until it locks into the desired position
and cannot be moved further.
B080C01A-AAT
Adjusting Seatback Angle
To recline the seatback, lean forward to take
your weight off it, then pull up on the recliner
control lever at the outside edge of the seat.
Now lean back until the desired seatback angle
is achieved. To lock the seatback into position,
release the recliner control lever.
WARNING:
To mlnlmlze rlsk of severe injury in the
event of a collislon or sudden stop, both the
driver and passenger seatbacks should al-
ways be in a nearly upright position while
the vehlcle Is In motlon. The protectlon pro-
vlded by the seat belts and airbags may be
reduced significantly when the seatback is
FEATURES OF YOUR HYUNDAI
recllned. There is greater risk that the driver
and passenger wlll slide under the belt whlch
may result in serious Injury if a crash occurs
when the seatback Is recllned.
B080O02A-AAT
Adjustable Headrests
Headrests are designed to help reduce the risk
of neck injuries.
To raise the headrest, pull it up. To lower it,
push it down while pressing the lock knob.
WARNING:
o Formaximumeffectlvenesslncaseofan
accident, the headrest should be adjust-
ed so the top of the headrest is at the
same helght as the top of the occupanf s
ears. The use of a cushlon that holds the
body away from the seatback is not rec-
ommended.
o Do not operate the vehlcle wlth the head-
rests removed as severe Injury to an
occupant may occur In the event of an
accident. Headrests may provlde protec-
tion agalnst severe neck Injuries when
properlyadjusted.
B080E01A-MT
Lumbar Support Control
(Driver's seat only) (If installed)
To adjust the lumber support, turn the handle
on the inboard side of the seat. To increase the
amount of lumbar support, pull the lever for-
ward. To decrease it, push the lever toward the
rear.
Hide quick links:
Advertisement
Table of Contents
