Layout Adjustments - Xerox WorkCentre 5325 User Giude

Layout Adjustments

Use the Layout Adjustment tab to change the following settings:
• Book Copying on page 99
• 2-Sided Book Copying
• Specifying the Original Size
• Erasing the Edges of a Copy
• Shifting the Image
• Rotating the Image
• Inverting the Image
• Specifying the Orientation of the Original
Book Copying
When copying a book, magazine, or other bound document, you can copy either the left or right page,
or both pages onto a single sheet of paper.
You must use the document glass to make copies from books, magazines, or other bound documents.
Do not place bound originals in the document feeder.
Notes:
• This feature and
activated simultaneously.
• Non-standard size documents will not be separated into two pages accurately.
To copy pages from a book or other bound document:
1. Touch Copy on the touch screen, then touch the Layout Adjustment tab.
Touch Book Copying. In the next screen, touch On.
2.
a. To copy both pages of an open book in page order, touch Both Pages. To specify the Binding
Edge Erase amount, the space between the image area and the binding, touch the plus or
minus (+/–) buttons.
To copy only the left page of an open book touch Left Page Only. To specify the Binding
b.
Edge Erase amount, the space between the image area and the binding, touch the plus or
minus (+/–) buttons.
c. To copy only the right page of an open book, touch Right Page Only. To specify the Binding
Edge Erase amount, the space between the image area and the binding, touch the plus or
minus (+/–) buttons.
Touch Save.
3.
Note: The facing pages of a bound document must be placed in a horizontal orientation on the
document glass as shown on the touch screen.
on page 100
on page 100
on page 100
on page 101
on page 102
on page 102
on page 102
2-Sided Book Copying on page 100 cannot be
WorkCentre 5300 Series Multifunction Printer
Copying
99
User Guide