Installing The Power Supply; Figure 5-4 Removing The Power Supply - Fujitsu SPARC Enterprise T1000 Service Manual

FIGURE 5-4
5.3.2

Installing the Power Supply

1. Unpack the replacement power supply.
2. Slide the power supply into the chassis and engage the two alignment pins in the
rear of the chassis that mate with the power supply.
3. Push the fastener down on the front of the power supply to lock it into place in
the chassis (
5-6 SPARC Enterprise T1000 Server Service Manual • April 2007
Fastener
Power supply
Removing the Power Supply
).
FIGURE 5-5