Fujitsu SPARC Enterprise T1000 Service Manual page 74

Note – fmdump displays the PSH event log. Entries remain in the log after the fault
has been repaired.
2. Use the message ID to obtain more information about this type of fault.
a. In a browser, go to the Predictive Self-Healing Knowledge Article web site:
http://www.sun.com/msg
b. Obtain the message ID from the console output or the ALOM CMT
showfaults command.
c. Enter the message ID in the SUNW-MSG-ID field, and click Lookup.
In this example, the message ID SUN4V-8000-DX returns the following
information for corrective action:
Article for Message ID:
Correctable memory errors exceeded acceptable levels
Type
Fault
Severity
Major
Description
The number of correctable memory errors reported against a memory DIMM has
exceeded acceptable levels.
Automated Response
Pages of memory associated with this memory DIMM are being removed from
service as errors are reported.
Impact
Total system memory capacity will be reduced as pages are retired.
Suggested Action for System Administrator
Schedule a repair procedure to replace the affected memory DIMM, the identity
of which can be determined using the command fmdump -v -u EVENT_ID.
Details
The Message ID:
memory DIMM is faulty as a result of exceeding the threshold for correctable
memory errors. Memory pages associated with the correctable errors have been
retired and no data has been lost. However, the system is at increased risk
of incurring an uncorrectable error, which will cause a service
interruption, until the memory DIMM module is replaced.
Use the command fmdump -v -u EVENT_ID with the EVENT_ID from the console
message to locate the faulty DIMM. For example:
fmdump -v -u f92e9fbe-735e-c218-cf87-9e1720a28004
TIME
Sep 14 10:09:46.2234 f92e9fbe-735e-c218-cf87-9e1720a28004 SUN4V-8000-DX
95% fault.memory.dimm
FRU: mem:///component=MB/CMP0/CH0:R0/D0/J0601
3-42 SPARC Enterprise T1000 Server Service Manual • April 2007
SUN4V-8000-DX
SUN4V-8000-DX indicates diagnosis has determined that a
UUID SUNW-MSG-ID