Installing The Dual-Drive Assembly; Figure 5-6 Removing The Single-Drive Assembly - Fujitsu SPARC Enterprise T1000 Service Manual

FIGURE 5-6
5.4.2

Installing the Dual-Drive Assembly

1. Unpack the drive assembly and the dual-drive cable.
The drive assembly should be shipped to you with one or two drives already
installed in the assembly, depending on the type of drive assembly that you ordered.
2. Disconnect the drive cable from the data and power connectors on the
motherboard and remove the drive cable from your server (
5-8 SPARC Enterprise T1000 Server Service Manual • April 2007
Removing the Single-Drive Assembly
).
FIGURE 5-7