Figure 3-7 Sunvts Test Selection Panel; Table 3-8 Useful Sunvts Tests To Run On This Server - Fujitsu SPARC Enterprise T1000 Service Manual

FIGURE 3-7
6. (Optional) Select the tests you want to run.
Certain tests are enabled by default, and you can choose to accept these.
Alternatively, you can enable and disable individual tests or blocks of tests by
clicking the checkbox next to the test name or test category name. Tests are enabled
when checked, and disabled when not checked.
TABLE 3-8
TABLE 3-8
SunVTS Tests
cmttest, cputest, fputest,
iutest, l1dcachetest, dtlbtest,
and l2sramtest—indirectly: mptest,
and systest
disktest
nettest, netlbtest
pmemtest, vmemtest, ramtest
serialtest
hsclbtest
7. (Optional) Customize individual tests.
You can customize individual tests by right-clicking on the name of the test. For
example, in
menu that enables you to configure this Ethernet test.
3-52 SPARC Enterprise T1000 Server Service Manual • April 2007
Processor(s)
Memory
Cryptography
SCSI - Devices(mpt0)
Network
e1000g3(netlbtest)
e1000g1(netlbtest)
e1000g2(netlbtest)
e1000g0(nettest)
SunVTS Test Selection Panel
lists tests that are especially useful to run on this server.
Useful SunVTS Tests to Run on This Server
, right-clicking on the text string ce0(nettest) brings up a
FIGURE 3-7
FRUs Exercised by Tests
DIMMS, motherboard
Disks, cables, disk backplane
Network interface, network cable, CPU
motherboard
DIMMs, motherboard
I/O (serial port interface)
Motherboard, system controller
(Host to system controller interface)