Imagereceiver Commands - Oce VarioLink 2221 User Manual

IP Scanner

ImageReceiver commands

Right-click the icon in the taskbar to display a menu.
No. Command
1 Save received images
2 Automatic Print Settings
3 "Settings for saved imag-
es"–"Image Folder Set-
ting"
4 "Settings for saved imag-
es"–"Sort Settings"
5 "Settings for saved imag-
es"–"Divided Settings"
6 "Notify Settings"–"Re-
ceive Notify Settings"
VarioLink 2221/2821/3621
1
2
3, 4, 5
6, 7
8, 9
10
Description
If there is a check mark beside this command, image data
is opened in ImageReceiver at the same time that it is re-
ceived, even if IP Scanner is not started.
When "Save received images" is clicked, a message ap-
pears, confirming whether or not the setting specified in IP
Scanner or ImageReceiver is to be taken over. To take over
the setting, click [Yes].
Click this command to display the Automatic Print Settings
dialog box. For details, refer to"Automatic Print Settings di-
alog box" on page 5-40.
Click this command to change the folder where the image
data is saved. This command is available only if there is a
check mark beside "Save received images".
A removable drive, CD-ROM drive or network drive cannot
be specified as the destination folder.
Select this command to specify settings for sorting
scanned documents. This command is available only if
there is a check mark beside "Save received images". For
details, refer to "Sort Settings dialog box (Scanner tab)" on
page 5-25.
Select this command to specify settings for dividing
scanned documents. This command is available only if
there is a check beside "Save received images". For de-
tails, refer to "Divided Settings dialog box" on page 5-29.
Select this command to specify settings for computer noti-
fication for transmitting scanned documents. This com-
mand is available only if there is a check beside "Save
received images". For details, refer to "Receive Notify Set-
tings dialog box" on page 5-30.
5
5-37