Oce VarioLink 2221 User Manual page 65

IP address faxing
9
To select the maximum transmission size and coding method, touch
[E-Mail Mode].
10
On the E-Mail Mode screen, settings
can be specified for the following.
Select the desired settings, and then
touch [Enter].
– TX Size (Max.): Specify the
maximum document size that
can be transmitted. Select
"Letter/Legal" or "11×17".
– TX Quality (Max.): Select the
maximum resolution that can be sent. Select "200dpi", "400dpi" or
"600dpi".
– Coding Method: Select the coding method for the data to be sent.
Select "MH", "MR" or "MMR". The data amount for the coding
methods increase as follows: MMR, MR, MH.
11
To change the port number, touch
[Port].
– To change the port number,
press the [C] (clear) key, use the
keypad to type in the port
number, and then touch [Enter].
– To return to the default setting,
touch [Default].
12
Touch [Next].
13
Check the information to be
registered, and then touch [Enter].
14
Touch [Enter] in each screen until the initial screen appears.
VarioLink 2221/2821/3621
3
3-33