Allowing Imagereceiver To Be Used - Oce VarioLink 2221 User Manual

5

Allowing ImageReceiver to be used

If [Keep Blocking] was clicked in the Windows Security Alert message,
ImageReceiver can no longer be used. In this case, follow the procedure
described below to allow ImageReceiver to be used.
1
Open Control Panel, and then double-click "Security Center", which
was installed with Windows XP SP2.
2
In the Windows Security Center dialog box, click "Windows Firewall".
3
In the Windows Firewall dialog box, click the Exceptions tab.
(For Windows Vista, select "Allow a program through Windows
Firewall".)
4
In the "Programs and Services" list, check that "MGS" with the
ImageReceiver program name is registered.
5
Select the "MGS" check box.
6
Click [OK].
!
Detail
The firewall setting can only be changed by a user with administrator
privileges.
5-6
IP Scanner
VarioLink 2221/2821/3621