Scan to PC operations
5
Touch the one-touch dial button to
be programmed.
–
Touch an index tab or touch
[Index List], and then touch the
desired one-touch dial button.
–
If the machine is set to allow
LDAP searches, a screen
appears, allowing the one-touch
dial button to be set to either
permit or prohibit the address from being found with an LDAP
search. For this button, select "No".
6
Type in the recipient name that will
appear on the one-touch dial button,
and then touch [Next].
7
Select the communication mode.
Touch [PC], touch [Scanner], and
then touch [Next].
8
Type in the IP address of the
machine where the data is to be
saved, and then touch [Next].
–
If a DNS server is specified from
the Network Setting screen, the
host name can be typed in.
Touch [Host Name], and then
type in the host name.
–
To change the entered address,
press the [C] (clear) key, and then enter the correct address.
9
To select the file format and coding method, touch [Scan Mode].
VarioLink 2221/2821/3621
4
4-33