IP Relay operations
Specifying chain dialing
If the recipient's address is longer than 64 characters, the address can be
specified by combining addresses registered to one-touch dial buttons and
an entered address.
Touch [Chain], and then select one-touch dial buttons or enter an address.
!
Detail
Chain dialing can only be used with one recipient per transmission.
With chain dialing, the address can contain up to 192 characters (64
characters from a one-touch dial button + 64 characters from a one-
touch dial button + 64 characters from an entered address).
Note
The one-touch dial buttons to be used
with chain dialing must be
programmed in advance.
VarioLink 2221/2821/3621
6
6-11