IP Scanner
Registering a scan button
Specify the machine scanning settings from IP Scanner, and then transfer
them to the machine and save them as a scan button. Make sure that
ImageReceiver is running.
0 Only one scan button can be programmed from a single computer (same
IP address).
0 A maximum of 6 scan buttons can be programmed on this machine. If 6
scan buttons have already been programmed, select a button in the
machine's touch panel, and then touch [Delete] to delete it. In this case,
"Scanner Available" remains displayed in IP Scanner. Click [Delete
Scanner Key] to display "Scanner Key Registration".
1
In the main window, click [Scanner Key Registration].
VarioLink 2221/2821/3621
5
5-43