Main Functions
Frequency Limits
The following functions regulate the minimum and maximum frequency:
Low
High
Forced Operation
Refer to page 256 for detail.
1.3
Airflow Direction Control (CTXS/FTXS Series)
Power-Airflow
The large louver sends a large volume of air downward to the floor and provides an optimum
Dual Louvers
control in cooling, dry, and heating operation.
<Cooling / Dry>
During cooling or dry operation, the louver retracts into the indoor unit. Then, cool air can be blown
far and distributed all over the room.
<Heating>
During heating operation, the large louver directs airflow downward to spread the warm air to the
entire room.
Wide-Angle Fins
The fins, made of elastic synthetic resin, provide a wide range of airflow that guarantees
comfortable air distribution.
Auto-Swing
The following table explains the auto swing process for cooling, dry, heating, and fan:
CTXS07JVJU, CTXS09/12HVJU, FTXS15/18HVJU
10˚
CTXS07LVJU, FTXS09/12LVJU
37
Frequency
Four-way valve operation compensation. Refer to page 57.
Compressor protection function. Refer to page 58.
Discharge pipe temperature control. Refer to page 58.
Input current control. Refer to page 59.
Freeze-up protection control. Refer to page 59.
Heating peak-cut control. Refer to page 60.
Defrost control. Refer to page 62.
Vertical Swing (up and down)
Cooling
Dry
5˚
5˚
40˚ 10˚
35˚
35˚
40˚
(R2814)
Vertical Swing (up and down)
Cooling / Dry
15˚
35˚
55˚
45˚
(R13527)
Functions
Heating
15˚
15˚
55˚
55˚
(R2813)
(R2815)
Heating
30˚
30˚
65˚
70˚
(R11402)
Horizontal Swing
(right and left)
Fan
5˚
5˚
55˚
55˚
(R2816)
Horizontal Swing
(right and left)
Fan
5˚
30˚
65˚
80˚
(R11403)
Function and Control
SiUS12-928_B
(R2817)
(R11404)