Timer Operation - Daikin SUPER MULTI NX CTXS07JVJU Service Manual

Super multi nx g-series / j-series
Hide thumbs Also See for SUPER MULTI NX CTXS07JVJU:
Table of Contents

Advertisement

SiUS12-928_B
4.6

TIMER Operation

TIMER Operation

Timer functions are useful for automatically switching the air
conditioner on or off at night or in the morning.
You can also use OFF TIMER and ON TIMER in combination.
To use OFF TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
1. Press "OFF TIMER button".
is displayed.
blinks.
2. Press "TIMER Setting button" until the time
setting reaches the point you like.
• Every pressing of either button increases or decreases
the time setting by 10 minutes. Holding down either
button changes the setting rapidly.
3. Press "OFF TIMER button" again.
• The TIMER lamp lights up.
To cancel the OFF TIMER operation
4. Press "CANCEL button".
• The TIMER lamp goes off.
NOTE
• When TIMER is set, the present time is not displayed.
• Once you set ON, OFF TIMER, the time setting is kept in the memory. (The memory is canceled
when remote controller batteries are replaced.)
• When operating the unit via the ON/OFF Timer, the actual length of operation may vary from the
time entered by the user. (Maximum approx. 10 minutes)
NIGHT SET MODE
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting
(1°F (-17 °C) up in COOL, 4°F (-15.5°C) down in HEAT) to prevent excessive cooling (heating) for
your pleasant sleep.
16
Operation Manual
FDXS-D Series
1, 3
2
4
118

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents