Outdoor Unit: 2MXS18GVJU
Step
Disconnect the connector
2
for the four-way valve coil
[S80].
3
Disconnect the
connectors for the
thermistors [S90] [S92]
[S93] and the overload
protector [S40].
205
Procedure
[S90] [S92] [S93]
[S40]
When reassembling, insert
[S80]
the clamp into the hole as
below.
(R17398)
[S40]: overload protector
[S90]: thermistors
(outdoor temperature, outdoor
[S92]: gas pipe thermistors
[S93]: liquid pipe thermistors
Pull out the clamp.
When reassembling, insert
each clamp of the themistors
into one of the holes as below.
(R17399)
When reassembling, insert
each clamp into the holes.
When reassembling, the
thermistor harness should be
placed between the electrical
box and the reactor harness
as below.
Thermistor
ASSY
SiUS12-928_B
Points
Clamp
(R17397)
heat exchanger, discharge
pipe)
[S93]
(R17401)
[S92]
Reactor harness
Reactor
harness
Thermistor
ASSY
(R17093)
Removal Procedure