SiUS12-928_B
2.7
HOME LEAVE Operation
HOME LEAVE Operation
Before using HOME LEAVE operation.
To set the temperature and airflow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and airflow rate for HOME LEAVE operation.
Record your preferred temperature and airflow rate.
Cooling
Heating
1. Press
2. Adjust the set temperature with
3. Adjust the airflow rate with FAN setting button as you like.
HOME LEAVE operation will run with these settings the next time you use the unit. To change the recorded information, repeat
steps 1-3.
18
Operation Manual
HOME LEAVE operation is a function which allows you to record your preferred
temperature and airflow rate settings.
To start HOME LEAVE operation
1.
Press
• "
" is displayed on the LCD.
• The HOME LEAVE lamp lights up.
Display
To cancel HOME LEAVE operation
2.
Press
• "
" is no longer displayed on the LCD.
• The HOME LEAVE lamp goes off.
Initial setting
Temperature
Airflow rate
77˚F (25˚C)
AUTO
77˚F (25˚C)
AUTO
. Make sure "
" is displayed in the remote controller display.
or
as you like.
.
again.
Selectable range
Temperature
64-90˚F (18-32˚C)
50-86˚F (10-30˚C)
CTXS-J, CTXS-H, FTXS-H Series
Airflow rate
5 step, "
" and "
"
5 step, "
" and "
"
82