Serial Port - Lindy aJ-Orion User Manual

Ip kvm switch classic usb
Table of Contents

Advertisement

Confirm Challenge Password
Confirmation of the Challenge Password
Email
The email address of a contact person that is responsible for the IP KVM SWITCH CLASSIC
USB and its security.
Key length
This is the length of the generated key in bits. 1024 bits are sufficient for most cases. Longer
keys may result in slower response time by the IP KVM SWITCH CLASSIC USB during
connection establishment.

5.5.5 Serial Port

The IP KVM SWITCH CLASSIC USB Serial Settings allow you to specify what device is
connected to the serial port and how to use it.
Configuration or console login
Do not use the serial port for any special function; use it only for the initial configuration
Modem
The IP KVM SWITCH CLASSIC USB offers remote access using a telephone line in addition to
the standard access over the built-in Ethernet adapter. The modem needs to be connected to
the serial interface of the IP KVM SWITCH CLASSIC USB .
Connecting to the IP KVM SWITCH CLASSIC USB using a telephone line allows you to set up
a dedicated point-to-point connection from your console computer to the IP KVM SWITCH
CLASSIC USB . In other words, the IP KVM SWITCH CLASSIC USB acts as an Internet
Service Provider (ISP) to which you can dial in. The connection is established using the Point-
to-Point Protocol (PPP). Before you connect to the IP KVM SWITCH CLASSIC USB , make
44

Advertisement

Table of Contents
loading

This manual is also suitable for:

39414

Table of Contents