Logging In; Login To The Ip Access Switch Lite - Lindy aJ-Orion User Manual

4.2 Logging In

4.2.1 Login to the IP KVM SWITCH CLASSIC USB
Launch your web browser. Direct it to the address of your IP KVM SWITCH CLASSIC USB
which you configured during the installation process. The address used might be a plain IP
address or a host and domain name if you have given your IP KVM SWITCH CLASSIC USB
switch a symbolic name in the DNS.
Example: Type the following in the address line of your browser when establishing an
unsecured connection:
http://<IP address of IP KVM SWITCH CLASSIC USB >
When using a secure connection, type in:
https://<IP address of IP KVM SWITCH CLASSIC USB >
This will lead you to the IP KVM SWITCH CLASSIC USB login page as shown below:
The IP KVM SWITCH CLASSIC USB has a built-in super user account that has all the
permissions enabled to administrate your IP KVM SWITCH CLASSIC USB switch:
Please note: Your web browser has to accept cookies, or else login is not possible.
Note: The user "super" is not allowed to login via the serial interface of the IP-KVM switch.
Please make sure you change the super user password immediately after you have installed
and accessed your IP KVM SWITCH CLASSIC USB for the first time. Not changing the
password for the super user is a severe security risk and could result in unauthorized access to
the switch and to the host system(s) to which it is connected.
Login name super (factory default)
Password pass (factory default)
11