Lindy aJ-Orion User Manual page 21

Save changes permanently
Undo Changes
Restore last settings
Soft Keyboard
Opens up the sub-menu for the Soft-Keyboard:
Show
Pops up the Soft-Keyboard. The Soft-Keyboard is necessary in case your host system runs a
completely different language and country mapping than your administration machine.
Mapping
Used for choosing the language and country mapping of the Soft-Keyboard.
Local Keyboard
Used to change the language mapping of your browser running the Remote Console Applet.
Normally, the applet determines the correct value automatically. However, depending on your
particular KVM and your browser settings this is not always possible. A typical example is a
German localized system that uses a US-English keyboard mapping. In this case you must
manually change the local keyboard setting to the correct language.
Hotkeys
Opens a list of previously defined hotkeys. Choose
one entry; the command will be sent to the host
system.
A confirmation dialog can be added that will be
displayed before sending the selected command to
the remote host. Select OK to perform the command
on the remote host.
Encoding
These options are used to adjust the encoding level in terms of compression and colour depth.
They are only available if "Transmission Encoding" is determined automatically (see the Section
called Transmission Encoding in Chapter 5.4).
Compression Level:
You may select a value between 1 and 9 with level 1 enabling the fastest compression and level
9 the best compression. The most suitable compression level should always be seen as a
compromise between the network bandwidth that is available, on your video picture to be
transferred, and on the number of changes between two single video pictures. We recommend
17