Lindy aJ-Orion User Manual page 19

Options
Opens the Options menu. A short description of each of the options
follows:
Monitor Only
Toggles the 'Monitor Only' filter on or off. If the filter is switched on,
no remote console interaction is possible but monitoring is.
Exclusive Access
If a user has the appropriate permission, he can force the Remote
Consoles of all other users to close. No one can open the Remote
Console at the same time again until this user disables the exclusive
access, or logs off.
A change in the access mode is also visible in the status
line indicated by this icon.
Scaling
Allows you to scale down the Remote Console window: 25% / 50% / 100% / Scale to fit. You
can still use both mouse and keyboard; however the scaling algorithm will not preserve all
display details.
Mouse Handling
The submenu for mouse handling offers two options for synchronizing the local and the remote
mouse pointer.
Fast Sync
The fast synchronization is used to correct a temporary, but fixed skew.
Intelligent Sync
Use this option if the fast sync does not work or the mouse settings have
been changed on the host system.
Note: This method takes more time than fast sync and requires a correctly
adjusted picture. Use the auto adjustment function or the manual correction in
the Video Settings panel to setup the picture.
Local Cursor
Offers a list of different cursor shapes to choose from for the local mouse pointer: Transparent,
Default, Big, Pixel, Crosshair. The selected shape will be saved for the current user and
activated the next time this user opens the Remote Console. The number of available shapes
depends on the Java Virtual Machine; a version of 1.2 or higher offers the full list.
Video Settings
Opens a panel for changing the IP KVM SWITCH CLASSIC USB video settings. The IP KVM
SWITCH CLASSIC USB features two different dialogs, which influence the video settings:
Video Settings through the HTML-Frontend: To enable the local video port, select this option.
This option decides if the local video output of the IP KVM SWITCH CLASSIC USB is active
and passing through the incoming signal from the host system.
The Noise Filter option defines how the IP KVM SWITCH CLASSIC USB reacts to small
changes in the video input signal. A large filter setting needs less network traffic and leads to a
faster video display, but small changes in some display regions may not be recognized
15