Table of Contents
Advertisement
3. Click Connect Drive or Connect ISO
4. Select a drive to redirect (if Connect Drive)
5. Select a ISO image to redirect (if Connect ISO)
IMPORTANT
1. Drive Redirection is only possible with Windows 2000 and later versions.
2. Drive Redirection works on a low SCSI level. The SCSI protocol cannot recognize
partitions; therefore the whole drive selected will be shared instead of any
particular partition.
3. When connecting to a legacy KVM switch, please select PS/2 mouse from the
Keyboard/Mouse setting on the web page. Otherwise you will not be able to
use Hot-keys.
5.2.4 Options
This option allows you to disable the mass storage emulation (and hide the virtual drive) if no
image file is currently loaded. To set this option, press the button Apply.
28
Advertisement
Table of Contents
