Remote Console Control Bar - Lindy aJ-Orion User Manual

4.3.2 Remote Console Control Bar

The upper part of the Remote Console window contains a control bar. Using its elements you
can see the state of the Remote Console and influence the local Remote Console settings. A
description for each control follows.
Sends the 'Control Alt Delete' key combination to the remote system
Auto Adjust button
If the video display is poor quality or distorted in some way, click this button and wait a few
seconds while the IP KVM SWITCH CLASSIC USB tries to adjust itself for the best possible
video quality.
Sync mouse
Activates the mouse synchronization process. Choose this option in order to synchronize the
local AND remote mouse cursors. This is especially necessary when using accelerated mouse
settings on the host system. In general, there is no need to change mouse settings on the host.
Single/Double mouse mode
Switches between the Single Mouse Mode (where only the remote mouse pointer is visible) and
the Double Mouse Mode (where remote and local mouse pointers are visible) Single mouse
mode is only available if using SUN JVM 1.3 or higher.
Tip: When in single mouse mode use the hotkey combination [ALT] + [F12] to release
mouse control and access the menus etc.
Ctrl+Alt+Delete
14