Lindy aJ-Orion User Manual page 47

3. Upload the certificate to the IP KVM SWITCH CLASSIC USB switch using the Upload
button.
After completing these three steps, the IP KVM SWITCH CLASSIC USB has its own certificate
that is used to identify it to its clients.
Note: If you destroy the CSR on the IP ACCESS KVM SWITCH CLASSIC there is no way to
get it back! In case you deleted it by mistake, you have to repeat the three steps as described
previously.
Common name
This is the network name of the IP KVM SWITCH CLASSIC USB once it is installed in the user's
network It is identical to the name that is used to access the IP KVM SWITCH CLASSIC USB
with a web browser (without the " http:// " prefix). In case the name given here and the actual
network name differ, the browser will pop up a security warning when the IP KVM SWITCH
CLASSIC USB is accessed using HTTPS.
Organizational unit
This field is used for specifying to which department within an organization the IP KVM SWITCH
CLASSIC USB belongs.
Organization
The name of the organization to which the IP KVM SWITCH CLASSIC USB belongs.
Locality/City
The city where the organization is located.
State/Province
The state or province where the organization is located.
Country (ISO code)
The country where the organization is located. This is the two-letter ISO code, e.g. DE for
Germany, or US for the USA.
Challenge Password
Some certification authorities require a challenge password to authorize later changes on the
certificate (e.g. revocation of the certificate). The minimal length of this password is 4
characters.
43