Lindy aJ-Orion User Manual page 45

Chain rule
The Chain rule determines whether the access from the hosts is allowed or not. It can be one of
these two values:
ACCEPT : access allowed
DROP : access not allowed
The rule can be configured to apply to a particular Group level (All, User, Super, Administrator).
When the IP-KVM receives a TCP packet, it will process the packet with the chain rule depicted
below. The process ordering is important; the packet will enter the chain at rule 1 first, if it meets
the rule then take action directly, otherwise go to chain rule 2.
Check the "Enable Group based System Access Control" to edit the rules
Users can add a new IP filtering rule by populating the fields in the new line by using Append or
Insert. Users can remove a rule by using Replace or Delete. Use Apply to save your changes.
41