Connecting The Ip Access Switch Lite To A Kvm Switch; Connecting An External Power Switch Option; Led Indicators And Switches - Lindy aJ-Orion User Manual

2.2.4 Dial up Line / Modem Connection
The RS232 port of the IP KVM SWITCH CLASSIC USB can either be used to connect to an
external Modem i.e. to set up a dial up line connection or can be used to connect to an external
RS232 managed power switch. Use the supplied cable to connect the appropriate unit.

2.2.5 Connecting an External Power Switch option

At the time of writing (October 2009) the IP KVM SWITCH CLASSIC USB supports the following
external power switch options.
Peppercon IPM-220L
Avocent SPC1 800/1600
Sentry In-Line Power Module
Leaning ePowerSwitch
However, we strongly suggest to use a directly IP managed power switch such as the LINDY
IPower Switches No.s 32657, 32658, 32653 or 32654

2.2.6. LED indicators and Switches

LED
Power
LAN
Ethernet
Link/Act
10/100Mbps
Link
RESET button: on the rear panel, hidden behind the small hole, press the button to
reboot the IP-KVM unit
RED – On when power is applied
Orange (10) -- 10BaseT Ethernet connection established
Green (100) -- 100BaseT Ethernet connection established
Blinking: Activity
ON: When no data activity and link is connected
Green -- Blinking when data is being transmitted
4
Indication